What Preparations Should Be Done After The Production Of Caustic Soda

- Feb 24, 2020-

The production of flake caustic soda should be sealed, and the site needs adequate ventilation. It is necessary for operators to go to work through special training, and it is necessary to strictly abide by the operating procedures. In addition to the above requirements for environment and equipment, the following editor told us.

1. Keep away from fire sources, heat sources and other workplaces. Smoking is strictly prohibited.

2. Use explosion-proof ventilation system and equipment. Avoid steam leakage into the air of the workplace. Avoid contact with oxidants, acids, alkali metals, amines.

3. The flake alkali manufacturer shall be equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency treatment equipment.

4. The flow shall be controlled during the filling process, and the grounding device shall be provided to avoid the accumulation of static electricity.

5. The flake alkali manufacturer announces the filter type gas mask (half mask) and anti-static work clothes to the operator.

6. Suitable materials shall be provided to control spillage in corrosive storage areas.

7. The humidity in the warehouse should not exceed 85%. It is necessary to seal the package and do not wet it.